Mitre Stop
Fig. 4
•
Put the mitre stop (Fig. 1/pos. 7) in the
respective clamp on the bench.
Caution:
Do not move the stop too
far in the direction of the saw disc! The
distance between the stop and the disc must
be 20 mm at least.
Cutting Angle Setting
Fig. 5
•
It is possible to read the disc set-up 0° -
45° from the scale (Fig. 1/pos. 10).
Loosening both the lock lever (Fig.
1/pos. 3), the disc inclination may be
changed.
Unit On and Off Switching
Fig. 6
•
Press the green knob “(Fig. 1/pos. 9) to
switch the unit on.
•
To switch it off, press the red knob “0“.
19
