Assigned Use
Bench circular saw is fit to wood and soft plastics lengthwise and cross wise. Round materials (tubes, rounds etc.) are not allowed to
be cut with the saw. Metal cutting is not permitted. .
The machine cannot be used for works other than for which the machine has been designed and that are specified in the Operating
Instructions. Any other use will be considered a use in conflict with the designation. The manufacturer will not be liable for any
consequential damage and injuries. Please be sure to know that the machine has not been designed for industrial purposes.
Residual Hazards and Protective Action
Mechanical Residual Hazards
Hazard Description
Protective
Action
Residual
Hazards
Cutting, incision
Risk of injury caused by rotating
parts
A contact with rotating band
may cause severe injuries.
Never touch the saw band while
it is moving
Worn or damaged aids should be
replaced immediately.
Catching, winding
Loose-fitting clothes, jewels or
long hair may be caught by
moving parts.
Wear tight-fitting garments and
no jewels. Protect your hair with
a hairnet.
Electrical Residual Hazards
Hazard
Description
Protective action
Residual hazards
Direct electrical contact
Indirect electrical contact
Defective cable or plug may
cause an electrical shock
Wounds cause by conductive
parts on open electrical or
defective structural parts.
Have the defective cable/plug
exchanged by a professional.
Use the unit only if connected
via a faulty current switch (FI).
Always unplug before any
maintenance.
Operate only with FI switch
installed.
Noise Hazard
Hazard
Description
Protective action
Residual hazards
Hearing impairment
Any long work with the tool may
impair hearing.
Always wear ear protectors
Materials and Other Substances Hazards
Hazard Description
Protective
Action
Residual
Hazards
Contact, aspiration
Lungs may be affected by great
amount of dust being formed.
Health-hazardous sawdust
emissions form operations
without extracting the dust.
Always wear breathing mask
when working with the unit.
Install and use an exhaust
equipment.
Human Factors Neglect
Hazard Description
Protective
Action
Residual
Hazards
Negligent use of personal
protection equipment
Operating the unit without
adequate PPE may cause
severe external/internal injuries
Always wear prescribed
protective clothing and work
considerately.
Inadequate local lighting
Insufficient light is a heavy
safety risk.
Provide for sufficient lighting
Other Hazards
Hazard Description
Protective
Action
Residual
Hazards
Thrown away articles and
splashes
The band or mechanical
particles may wound your eyes
in the course of cutting job.
Always wear protection
goggles.
16
