GÜDE Expert Sensor Box 7213, Руководство пользователя

Страница: 21 / 100

21
Expert Sensor Box 7213/7214 © 2022 GUDE Systems GmbH
Operating
2.3.3
Bootloader Activation
The configuration of the device from the application "GBL_Conf.exe" is only possible, if
the device is in Bootloader Mode.
Activation of the Bootloader Mode (1-Button)
1) via push button:
· Press and hold the button for 3 seconds until the Status LED flashes slowly. If a dis-
play is available, "Press again to jump to BOOTLOADER" appears. Then briefly press
the button again to activate the boot loader, or if you wait 3 seconds instead, the
device returns to the initial state.
2) or
· Remove the power supply
· Hold down the "Select" button. If the push button is recessed, use a pin or paper clip
· Connect the operating voltage
3) by Software:
· Start the "GBL_Conf.exe" program
· Do a network search with the "Search" menu action
· Activate in menu "Program Device" the item "Enter Bootloader"
This function is only possible if "Enable FW to BL" was activated in the application
"GBL_Conf.exe" before, while the device was already in the bootloader.
4) via web interface:
Press "Enter Bootloader Mode" on the maintenance web page.
Whether the device is in Bootloader mode, is indicated by the flashing of the status
LED, or it is shown in "GBL_Conf.exe" application after a renewed device search (ap-
pendix "BOOT-LDR" after the device name). In Bootloader mode the program
"GBL_Conf.exe" can disable the password and the IP ACL, perform a firmware update,
and restore the factory settings.
For devices with relays, entering or exiting the bootloader mode does not change the
state of the relays as long as the operating voltage is maintained.
Abandonment of the Bootloader Mode (1-Button)
1) via push button:
· Hold down the button for 3 seconds until the status LED flashes in a long-on, short-out
rhythm. If a display is available, "Press again to jump to FIRMWARE" appears. Then
briefly press the button again to activate the boot loader, or if you wait 6 seconds in-
stead, the device returns to the initial state.
2) or
18