GÜDE Expert Power Control 8221 Series, Руководство пользователя

Страница: 91 / 115

91
Expert Power Control 8221/8226 © 2022 GUDE Systems GmbH
Specifications
port {port_num} reset start reset sequence for port
port {port_num} toggle toggles port
port {port_num} batch set {OFF=0|ON=1} w ait
{num_secs} {OFF=0|ON=1}
starts batch mode for port
port {port_num} batch cancel cancels batch mode
port {port_num} label set "{name}" sets port label name
port {port_num} label show show s port label name
port {port_num} tw inport set {OFF=0|ON=1} sets port tw inport state to on/off
port {port_num} tw inport show show s port {num} tw inport state
port {port_num} initstate coldstart set {OFF=0|
ON=1|REMEMBER=2}
sets port coldstart initialization
port {port_num} initstate coldstart show show s port coldstart initialization
port {port_num} initstate repow er set
{INIT_STATE=0|CURRENT_STATE=1}
sets port initialization for bank repow er
port {port_num} initstate repow er show show s port initialization for bank repow er
port {port_num} initstate delay set {num} sets port init delay
port {port_num} initstate delay show show s port init delay
port {port_num} repow erdelay set {num} sets port repow er delay
port {port_num} repow erdelay show show s port repow er delay
port {port_num} resettime set {num} sets port reset duration
port {port_num} resettime show show s port reset duration
port {port_num} w atchdog enabled set {OFF=0|
ON=1}
sets port w atchdog to on/off
port {port_num} w atchdog enabled show show s port w atchdog state
port {port_num} w atchdog mode set {OFF=0|
PORT_RESET=1|IP_MS=2|IP_MS_INV=3}
sets port w atchdog mode
port {port_num} w atchdog mode show show s port w atchdog mode
port {port_num} w atchdog type set {WD_ICMP=0|
WD_TCP=1}
sets port w atchdog type
port {port_num} w atchdog type show show s port w atchdog type
port {port_num} w atchdog link dow n set {OFF=0|
ON=1}
sets if w atchdog active w hen eth link dow n
port {port_num} w atchdog link dow n show show s if w atchdog active w hen eth link dow n
port {port_num} w atchdog host set "{dns_name}" sets port w atchdog host target
port {port_num} w atchdog host show
show s port w atchdog host target
port {port_num} w atchdog port set {ip_port} sets port w atchdog TCP port
port {port_num} w atchdog port show show s port w atchdog TCP port
port {port_num} w atchdog pinginterval set {num} sets port w atchdog ping interval
port {port_num} w atchdog pinginterval show
show s port w atchdog ping interval
port {port_num} w atchdog pingretries set {num} sets port w atchdog ping retries
port {port_num} w atchdog pingretries show show s port w atchdog ping retries
port {port_num} w atchdog retrybooting set
{OFF=0|ON=1}
sets port w atchdog retry booting to on/off
port {port_num} w atchdog retrybooting show show s port w atchdog retry booting state
port {port_num} w atchdog bootretries set {num} sets port w atchdog retry boot timeout
port {port_num} w atchdog bootretries show
how s port w atchdog retry boot timeout
port ignore pow erloss {BANK_A=1|BANK_B=2}
set <off=0/on=1> enable no pow erport shutdow n w hen pow erloss
detected
port ignore pow erloss {BANK_A=1|BANK_B=2}
show
show if pow erloss is ignored
portsensor enters cmd group "portsensor"
portsensor all {field_list} show
show s energy sensors according field list of all
port sensors
5
portsensor {port_num} {field_list} show
show s energy sensors according field list of one
port sensor
5
portsensor {port_num} {energy_sensor} value
show
show s energy sensor of given port 5
portsensor {port_num} counter reset resets energy metering counter
portsensor {port_num} {energy_sensor} events
set {OFF=0|ON=1}
enables sensor events on/off
portsensor {port_num} {energy_sensor} events
show
show s if sensor events are enabled
portsensor {port_num} {energy_sensor} events
type set
"{EVT_SYSLOG=0,EVT_SNMP=1,EVT_EMAIL=2,E
enables different event types