GB
4
1
Unit
High-performance motor, top quality blade for clean cut, optimum safety thanks to “quick-stop” braking,
rounded grip saves your wrist during vertical trimming. Easy trimmer blade disassembling for cleaning.
1.1
Scope of Delivery
1.1.1 GHS
510
G
Fig. 1
1. Trimmer
blade
2. Hands protective shield
3. Mains
cord
4. Handle
with
switch
5. Two-handed safety switch
6. Guiding
grip
7.
Blade cover
1.2
Warranty
Warranty claims according to the attached Warranty Certificate.
2
General Safety Instructions
Read the instructions for use thoroughly before the initial operation of the machine. If any doubts regarding
the connection and operation arise, consult the manufacturer (servicing department).
Observe the instructions shown below carefully to guarantee the high degree of safety.
CAUTION !
To be safe at working with this hedge trimmer it is required to observe precisely these instructions and
information on safety, installation and operation contained in the Manual. Any person engaged in the
operation or maintenance of the machine should be knowledgeable regarding the operation manual and
aware of any potential risk. Prevent children, sick and infirm persons from access. While you are in the
working area, look after the children very carefully. Observe any regional and local safety precautions
applicable in your place. The same applies to any provisions on the safety at work and health protection in
the work site.
The manufacturer shall not be held liable if the machines it manufactures are altered in an unauthorised
manner, in result of which damage was inflicted.
Warning!
It is necessary to observe the essential safety precautions when using the machine tools. Kindly
follow the tips and instructions in the additional safety precautions.
1.
Pay attention to the conditions of the area you’re working in.
Do not expose the machine to rain.
Never use the machine neither in wet nor in damp environment. Provide for good lighting when cutting.
Do not use the machine in proximity of flammable liquids and gases.
