4
5
DRILLING THE HOLE
Find a location to install the Guardian’s control switch, either next to or near your existing kill switch
then drill a 21mm (0.8”) diameter hole.
NOTE
switch
the orientation of the securing nut shown below, dependent on panel thickness:
21mm diameter hole
OLAS TRANSMITTERS
OLAS RECEIVERS
OLAS MOBILE APPLICATION
IMPORTANT INFORMATION
GUARDIAN INSTALLATION
The OLAS TAG or the OLAS FLOAT-ON are considered OLAS transmitters. They emit a Bluetooth signal
which is monitored by the OLAS receivers.
The OLAS receivers track the OLAS transmitters. OLAS receivers are:
1.
Guardian
2.
Core
3.
OLAS Mobile application
4.
Extender - This operates as a repeater to increase the range of the Guardian and Core
The OLAS mobile application allows the OLAS transmitters to be used as a MOB/proximity alarm if
used solely with OLAS transmitters. When an OLAS transmitter goes out of range an alarm is set off and
overboard screens are activated.
When the OLAS mobile application is connected to the Guardian or Core it allows greater control over the
OLAS transmitters that are being tracked.
For iOS search for ‘OLAS: Wireless Marine Safety’ on the App Store.
For Android search for ‘Exposure OLAS – Overboard Location Alert System’ on the Google Play Store.
The Guardian has been designed for recreational marine use. The design conforms to appropriate
Electromagnetic Compatibility (EMC) regulations but for optimal performance correct installation is required.
For optimum performance the mobile device and the Guardian should be located at least 0.5 meters from
any equipment transmitting radio signals including VHF Radios, antennas and cables.
WARNING: Do not attempt to install the Guardian until you know that the power supply is switched OFF.
Where required use the supplied wire connectors which are suitable for connecting wire dimension 20-
18AWG. If wire extensions are required use 20AWG or thicker wire.
Always connect your power supply after the main power switch to avoid current drainage when the boat is
not in use.
Ensure all wire connections are waterproof using marine specific connectors, such as heat shrinkable
butt splices.
8-18 mm
panel
thickness
1-8 mm panel thickness
Содержание EXPOSURE OLAS
Страница 1: ...PUG2...
