Guardian Big Boss HLL, Инструкция по эксплуатации

Страница: 5 / 12

G
uar
di
an
F
al
l P
ro
te
ct
io
n
63
05
S
. 2
31
st
St
.,
Ken
t,
W
A
9
80
32
3
Limitations
Fall Clearance: There must be sufficient clearance below the anchorage connector to arrest a fall before the
user strikes the ground or an obstruction. When calculating fall clearance, account for a MINIMUM 2’ safety
factor, deceleration distance, user height, length of lanyard/SRL, harness stretch, lifeline deflection, and all
other applicable factors.
Diagram shown is an example fall clearance calculation ONLY.
Swing Falls: Prior to installation or use, make considerations for eliminating or minimizing all swing fall
hazards. Swing falls occur when the anchor is not directly above the location where a fall occurs. Always work
as close to in line with the anchor point as possible. Swing falls significantly increase the likelihood of serious
injury or death in the event of a fall.
TOTAL FALL CLEARANCE = DEFLECTION + FREE FALL + DECELERATION + STRETCH + Safety MARGIN + Swing Fall
Work Surface
Anchor Point
Big Boss HLL
Deceleration Distance
Lifeline Deflection (See Below)
Harness Stretch (1.5’)
Safety Margin (2’)
Free Fall Distance
Work Surface
Swing Fall (If Applicable)
8.4’
DEFLECTION
What’s the length of your HLL span?
SPAN =
DEFLECTION =
14.4’
10’
9.4’
20’
10.4’
30’
11.4’
40’
13.4’
60’
12.4’
50’ 70’
15.4’
80’
15.6’
82’
Anchor Point