Guardian Fall Protection G-Lok, Руководство по эксплуатации и инструкция

Страница: 6 / 8

It is important that you drill your G-Lok hole to the
manufacturer’s required diameter. All holes must be
drilled to a 3/4” diameter. Do not use holes larger than
3/4” or holes that are not round in shape.
NEVER USE A BENT DRILL BIT!!
This product is to be used by qualified fall protection personnel
only. It is to be anchored in accordance with manufacturer’s
requirements.
The steel flange must be at least 1/4” thick and you must drill the
center of the hole at least 1-1/2” from any edge or corner.

Drill a 3/4” diameter hole .

Drill hole in the center of core hollow.

Drill center of hole at least 1-1/2” from any edge or corner.

Always inspect a previously drilled hole, make sure the hole is round and a
true 3/4” diameter hole.

Inspect the unit for damage each time you use it. If damage has occurred,
dispose of unit.

Make sure the Toggle Bar is activated in the open position.

The Hole Plug must be seated in the steel hole.

Never rely on a unit placed by unqualified workers.

Never leave a unit inserted in a hole overnight.
Instructions For Use In Steel
6
Use For Fall Protection Only !!
SEE DIAGRAMS ON NEXT PAGE !!