Labels
G
uar
di
an
F
al
l P
ro
te
ct
io
n
63
05
S
. 2
31
st
St
.,
Ken
t,
W
A
9
80
32
7
85178 (Rev. D)
*Serial # and date of manufacture engraved on Beamer Anchor Aluminum Bar.
MADE IN USA
WARNING! READ CAREFULLY BEFORE USING
MANUFACTURER’S INSTRUCTIONS INCLUDED AT
TIME OF SHIPMENT MUST BE FOLLOWED AT ALL
TIMES FOR PROPER USE, MAINTENANCE, AND
INSPECTION. ALTERATION, ABUSE , OR MISUSE OF
THIS PRODUCT MAY RESULT IN SERIOUS INJURY OR
DEATH. DO NOT REMOVE LABELS.
Inspection Grid:
Inspect prior to each use. Competent Person must
inspect and record at least every 6 months.
ANSI Z359.18-17, ANSI A10.32-12, OSHA 1910,
and OSHA 1926 Subpart M.
Type A anchorage connector.
Maximum 1 connection per Beamer Anchor.
Capacity range: 130 - 420 lbs.
5,000 lb. MBS (minimum breaking strength).
Minimum service temperature: -30º F.
Always use with compatible equipment, possibly
including special lanyard for tie-off at foot level.
MAKE ONLY COMPATIBLE CONNECTIONS.
FOR USE ON STRUCTURAL STEEL I AND H BEAMS ONLY.
Adjust Beamer Anchor at every junction or flange
dimension change.
Beamer BBC
Part #:
