COMPONENTS & ACCESSORIES
14
SLIDING DIRT SHIELD
•
The sliding dirt shield is made up of two
components: the locking sleeve (A) and
rubber deflector (B). One end of the locking
sleeve has 4 slots; the other end is solid.
•
To install, slide the rubber deflector over the
nozzle and coupling into position (C) on the
barrel. Separate the locking sleeve and
clamp over the barrel in position (D). Make
sure the slots are closest to the nozzle.
(Fig. 1)
•
Slide the rubber deflector so that it is positioned
over the solid end of the locking sleeve. The
locking sleeve and rubber deflector assembly
can now slide freely up and down the barrel
shaft.
(Fig. 2)
•
To lock the sliding dirt shield in position, slide
the assembly to the desired position on the
barrel. Then firmly push the rubber deflector
over the slotted end of the locking sleeve.
(Fig. 3)
A
B
Fig. 1
D
C
Locking Sleeve
Rubber Deflector
NOZZLE
COUPLING
Fig. 2
Fig. 3
HT311-2_UAS4000-OpsMan.indd 15
HT311-2_UAS4000-OpsMan.indd 15
3/13/20 5:41 PM
3/13/20 5:41 PM
