COMPONENTS & ACCESSORIES
13
•
The 45º adapter enables the UTILITY AIRSPADE to
operate in tight locations where obstructions do not
allow the use of a straight barrel. Unscrew the existing nozzle from the
barrel. Ensure the 45º adapter locking ring is shouldered against the 45º
adapter body and the 45º adapter coupler is snug against the O-ring. Clean the
threads and the O-rings on the barrel and on the 45º adapter assembly and apply
anti-seize compound to the threads of both. Screw the 45º adapter assembly onto
the barrel via the coupler.
Hand-tighten only.
Screw the nozzle onto the other end
of the 45º adapter.
Hand-tighten only.
To lock the adapter into position, shoulder
the locking ring against the coupler.
CAUTION:
When using the 45º
adapter, compressed air exiting
the nozzle will force the tip of
the tool away from the direction
the nozzle is aimed. To prevent
this from occurring, the operator
should place the free hand at
least midway down the barrel.
Grip the barrel tightly to brace
the tool against the force
produced by the exiting
compressed air.
45º ADAPTER
Barrel Connector
Barrel
Barrel Sleeve
O-Ring (Not Shown)
Nozzle
45º Adapter Body
45º Adapter Coupler
45º Adapter Locking Ring
HT311-2_UAS4000-OpsMan.indd 14
HT311-2_UAS4000-OpsMan.indd 14
3/13/20 5:41 PM
3/13/20 5:41 PM
