Guangzhou J&J Sanitary Ware SPA-8218, Руководство по эксплуатации

Страница: 8 / 15

***Notice***
i. When setting temperature is lower than or equal with water
temperature
， Even the Preheating is on, but the circulation PUMP and
HEATER are not working 。
ii. When the HEATER is “I” type frame ， The power of circulation PUMP must
reach 750W 。 Otherwise the heater won’t work due to not enough water
pressure to drive pressure switch.
iii. Conditions meet the above “2”
，
and the HEATER is still not
working
，
Please short the line of water pressure switch
。
7 、
Circulation-cleaning
：
When the current time is as same as the presetting time, the preset is “ ” and the tub is filled with
water, the circulation cleaning will start, the circulation pump works at the same.. The LCD shows the countdown
time. All the surfing pumps and blower will work for 30 seconds at every 30 minutes. The Ozone works at every
15 minutes
.
During the preheating, the Circulation cleaning will be turned off automatically once the preset time is
finished. or Pressing the “ ” key can stop directly.
8
、
Operation to Power ON/ OFF
Pressing the key “ ” from “power-off” status to enter the “power-on” status. To pressing the in the
status of “power-on” to enter the “power-off” status. The LCD screen shows the on or off. See following Fig.9-10
AM
OFF
AM
OFF
Fig.9 ： OFF Fig.10 ： ON
9
、
Temperature setting
：
Under the status of “Power-on” can setting temperature. It will add 1 centigrade by press “ ” each time ， the
temperature will be added continually till reach 40 centigrade(106 Fahrenheit ) by press “ ” without stop.
Press “ ” again
，
and the
temperature is show
15
℃(59 Fahrenheit) 。 The range of adjustment is ：
15~40
℃(59~106 Fahrenheit)。
10
、
Operation Radio & CD
：
AM
PUMP3
Fig.11
： Radio frequency is 105.2 MHZ ， Save the present frequency to channel 3 (Save channel)
or Exchange the frequency form channel 3 to the present (Searching channel)
8