Guangzhou J&J Sanitary Ware SPA-8218, Руководство по эксплуатации

Страница: 3 / 15

2
、
With 3 surfing pumps,1 circulation pump, 1 view pump, and 1 blower.
3
、
Ozone, Spa lights.
4
、
CD audio-input / Display of radio frequency and preserve 10 channels
5
、
Volume display and 87 frequency adjustment
6
、
Circulation cleaning and time set of circulation cleaning
7
、
24 hours display and time set
8
、
Memory preserve once power off
9
、
Fahrenheit & Celsius degree switch
10
、
Antifreezing functions
11 、
Keys with backlight
12 、 Lock setting
13
、
Three-phase or single-phase, available
of 110-120VAC or 220-240VAC
14 、 Choice with “CD” function,
offering a AC supply for circumscribing DVD or TV
15 、 Choice with power control
16
、
C
hoice with galvanoscope device
17
、
In the status “Power off " ,the spa only can be operated the function for presetting .
18
、
When start the circulation pump, the massage pump will start at the same time,
and it will stop automatically after working 30seconds. but the heater will not start.
19
、
Configuration for 3kw heater: when the heater start, and switch on three pcs massage pumps,
the heater will stop automatically. but if you switch off one pc from the three pcs massage pumps,
the heater will resume working automatically.
20
、
Configuration for 6kw heater: when the heater start, and switch on two pcs massage pumps,
the heater will stop automatically. but if you switch off one pc from the three pcs massage pumps,
the heater will resume working automatically.
21
、
Massage pump will stop automatically after after working 25minutes, if you want it to go on to
work,
you need to start it again.
22
、
All circuit boards can adapt 220V and 380V which are both compatible with dual-use
III
、
Operation
Fig.3
：
Temperature Normal Display
Fig.4
：
Senor on/short circuit display
1 、
When you first start the spa, the backlight will be dimmed and the LCD will show the current time and
temperature. If there is a problem with the circuit board the controller will display the code “E1” . When
the radio frequency is displayed as “---” it indicates that the spa is in “power off” model, and pre-heating
and circulation cleaning function is off.
2
、
Lock memory Mode
(optional function)
：
The memory lock will start work by pressing
“
MEM
” key
in the status of
“
power off
”
when the spa
3