10
DTN 80
02.2019 | Designed in Germany
Swing-door drive
Operating instructions
eng
Performing work on the door system
To install the door system, the customer must provide a protective contact
socket.
If no such socket outlet is present, an all-pole disconnect switch must be
provided by the customer. Connection must be performed by an electrical
specialist in accordance with VDE 0100.
The safe isolation of the door system from the supply must be ensured for
the duration of the work.
The connection must be secured against accidental switch on and the safe
isolation of the door system from the supply must be verified.
If damage to the power supply cable is identified, the power plug must be
removed from the socket outlet immediately. The power supply cable must
be replaced by a qualified electrician.
Signage
Additional signage on the doors and switch elements must be clearly leg-
ible, easy to understand and must also be long-lasting.
Disposal
Please note the door system is equipped with electronic parts
Do not dispose of the door system at the end of its service life as domes-
tic waste; instead take it to one of the free municipal collection points for
electronic scrap.
It is advisable to have the door system disposed of by a specialist service
provider.
2.3 Applicable documents
Door System Inspection Book
The Door System Inspection Book contains details of the inspections that
must be carried out during periodic checks of the system.
