24
DTN 80
02.2019 | Designed in Germany
Swing-door drive
Operating instructions
eng
11. Cleaning
Avoid damage
Never use solvent-based cleaners.
X
Z
Clean the radar motion sensors on both sides with a soft clean cloth.
X
Z
Keep the floor clean in the area where the door leaves move.
X
Z
Clean the scissor-action arm and/or the slide rail
Cleaning the swing doors
Glass
Wash and wipe down using cold vinegar water or glass cleaner.
Untreated metal surfaces (e.g
stainless steel)
Clean with a mild lye and a slightly damp, non-abrasive cloth.
Painted and coated surfaces
Clean as required, using water and soap.
Anodised surfaces
Clean surfaces with non-alkaline lubricant soap
(pH value between 5.5 and 7).
X
X
When cleaning in the door area and at the swing door, select the
operation modes OPEN or OFF.
Ensure that no water enters the swing door drive.
