background image

9

Other GTO Products for Your Safety and Convenience:

For your nearest dealer, please call 1-800-543-GATE (4283)

or visit www.gtopro.com

Key Chain Two Button Transmitter (RB742)

The Key Chain Mini Transmitter is a miniature version of the GTO/PRO entry transmitter 
and has the same adjustable code settings. Used for remote control of multiple separate gate 
operators, and/or garage door operator(s). 

(battery included)

 

Automatic Gate Lock

 

(FM144)

A

 

MUST for securing the gate against forced entry or exit. Solenoid driven, 

plated steel bolt lock with a zinc plated steel housing. Used with GTO/PRO 
systems for maximum stability and security. Comes with a keyed manual release. 
Recommended for gates over 8 ft. (2.4m) long. Ideal for animal enclosures or high 
wind areas.

5 Watt Solar Panel

 

(FM122)

If your gate application is far away from an AC power outlet, or greater than 1,000 ft 
(304.8m), you can choose to power your GTO/PRO gate operator system with these high 
output GTO/PRO solar panels. Each solar panel comes with tubular steel support, mounting 
clips, wire connectors, and 8 ft of Low Voltage Wire (RB509).

1

2

ABC

3

DEF

4

GHI

5

JKL

6

MNO

7

PRS

8

TUV

9

WXY

0

GTO Digital Keypad (F310)

This specially designed digital keypad can be easily installed as a wireless or wired 
keypad. It can be programmed to use up to 25 different personal identification number 
(PIN) codes. This used in combination with the GTO/PRO automatic gate lock 

(see 

automatic gate lock)

 adds an additional layer of security for your property.

Entry Transmitter

 

(RB741)

 

The GTO/PRO entry transmitter includes a visor clip and has adjustable code settings. This 
is the standard transmitter included in every GTO/PRO gate opener kit.

(battery included)

Push Button (Doorbell) Control

 

(RB101)

Unlit doorbell button for remote entry or exit control. Connects directly to the control board 
and uses 16 gauge, multi-stranded low voltage wire (

not included

).

Pin Lock (FM345)

The pin lock substitutes for the clevis pin at the front of the opener. Helps prevent theft of the 
opener from the gate, while allowing quick release of the opener.

AUT

OMA

TIC 

GAT

E LO

CK

®

ELECTRO

NIC SECURITY L

OCK

Residential Wireless Intercom / Keypad (F3100MBC)

This versatile digital intercom with keypad system is ideal for any residential application, 
alerting you of visitors and allowing gate operator activation from the safety of inside your 
home. The intercom provides superior range with crystal clear two-way communication up to 
500 ft (152.4m) wireless or 1,000 ft (304.8m) wired and can support up to three additional base 
stations to allow access from multiple rooms.

POWER 

Keypa

Batt 

Low

 

Gra

nt 

Permi

ssi

on 

An

swe

DV  9V 

ACC

ES

S CONT

ROL

 SY

ST

EMS

 

1-

80

0-54

3-

42

83

 

Содержание FM139













Отзывы: