GTM Professional GTS1300C, Руководство пользователя

Страница: 31 / 52

6.8 Fill the engine with oil
Preliminary requirements
• Spout • Engine oil
Procedure
1. Stop the machine. Refer to section
5.6
.
Warning:
Make sure that the engine
is still warm.
Note:
For the exact location of
the drain plug (B), refer to
the OEM documentation of
the engine.
2. Remove the drain plug (B).
3. Tilt the machine to drain all the engine
oil.
4. Install the drain plug (B).
5. Remove the fill plug (A).
6. Fill the reservoir until the oil reaches the indicator on the plug.
7. Install the fill plug (A).
6.9 Lubricate the bearing housing
Preliminary requirements
• Grease pump • Universal grease
Procedure
1. Clean the grease nipple (A).
2. Add grease through the grease
nipple. Use the grease pump.
3. Remove excessive grease.
4. Repeat step 1 and step 2 for the
grease nipple at the other side of the
machine. Remove the belt cover for
access. Refer to section
6.10.1
.
B
A
A
Preventive maintenance
D09-CC13S20-11 31