Gtech eBike City, Руководство по эксплуатации

Страница: 38 / 48

38
Maintenance
Make sure that there isn’t an excess of brake
cable between the brake arms. If there is excess
see page 39 to adjust the brake cable. If there is
no excess, continue to follow the instructions on
this page.
Turn the screw slightly clockwise to tighten it,
until the gaps are equal on either side and the
brake pads touch the rim simultaneously. You
may need to loosen the screw on the opposite
brake arm by turning it anti-clockwise to do this.
Locate the brake spring adjuster screws at the
bottom of the brake arm that is moving towards
the wheel rim the slowest. You will need a Phillips
head screwdriver for this.
The brakes on either side of the wheel rim should
now appear symmetrical when applied.
Adjusting brake travel
Your brake pads should hit the wheel rim at the same time, if this doesn’t happen then you will need
to adjust them.