33
Maintenance
Keep the rear wheel in this position and tighten
the belt tension adjuster screw that is on the
same side as the drive belt and sprockets.
Slide rear wheel backwards, making sure that the
belt stays on the sprockets. This creates the initial
tension on the belt.
To align the rear wheel with the frame, tighten the
other belt tension adjuster screw, located on the
opposite side. You might need to adjust the first
screw again before the wheels line up.
Rotate the pedals slowly and line up the
teeth to feed the slackened drive belt onto the
pedal sprocket.
Make sure that you do not tighten the belt too much as this will make it hard
to pedal.
Содержание eBike City
Страница 1: ...OPERATING MANUAL eBike City ...