5
3. Packing and shipping
3.1 Protection lock
Pan and tilt locks are equipped to ensure safe transportation.
The horizontal axis has 8 locking points and the vertical axis has 4 locking points.
3.2 Unpacking
Notes
All products are quality controlled before they dispatched to customers. If the fixture is damaged during delivery,
the customer must notify the shipper and manufacturer to file a damage insurance claim. Photographic evidence
of the damage must be provided.
Flight- Case (specification:
645*505*715mm): One set in a box. Uncover the flight-case and remove the plastic
packing bags. Hold the handles of the fixture firmly and take it out carefully.
Cardboard box (specification：744*715*525mm)：One set in a box. Open the box and take out the whole set of
packaging foam which are contained both the fixture and its accessories. Remove the foam from the top, put
away the accessories, and then take out the fixture wrapped in the plastic bag.
Notes
Check if the pan and tilt are locked before connecting the fixture to power.
3.3 Packing after use
1.
Switch off the fixture and wait for at least 5 minutes before disconnecting it from AC power. Cool down the
fixture for at least 15 minutes before packing.
2.
Lock pan and tilt.
3.
Flight case: Wrap the fixture in plastic bags. Gripping the handle and then place it in the flight case along with
all the accessories carefully. Close the cover lid. The
wrap page
are not allowed over 3 layers. Do not upside
down.
4.
Cardboard box: Wrap the fixture in plastic bags. Put it in the packaging foam along with all the accessories.
Place the other set of packaging foam on top then put it carefully in the cardboard box.
Tilt Lock
Pan Lock
