14
Problem
Possible Cause
Suggested Correction
the ballast to overheat, so we need solve the
problem and replace components as required
Thermostat damaged.
Replace.
Shaking, wrong
position, and out
of control gobo
wheel
No function the connector between gobo
wheel motor and drive, loose, damaged, or
broken cables connecting the gobo wheel
and drive.
Reconnect the gobo wheel motor to the drive, and
replace cables as required.
The gobo wheel motor's drive IC on the PCB
might be out of condition.
Replace the drive having the same software
version as required.
Dislocated magnetic tube and positioning
magnet, or damaged magnetic tube.
Calibrate the position of the magnetic tube to
the positioning magnet, and replace magnetic
tube as required
Shaking motor, wrong rotation angle, losing
step or damaged motor
Replace the motor as required.
Decreased
brightness, uneven
pattern projections
Normal end of lamp life.
Test the lamp in an adjacent fixture which is
known to be operating properly and then replace
as necessary
The midline of the lamp is not aligned with
the center point of the effect assembly
(consisting of the rotating gobo wheel, static
gobo wheel, color wheel, strobe, prism, and
frost), focus module, and object lens.
Reinstall the lamp. Adjust the lamp position
until the midline of the lamp is aligned with the
center point of the effect assemblies (consisting
of the rotating gobo wheel, static gobo wheel,
color wheel, strobe, prism, frost, the focus
adjusting module, and the object lens).
Excessive dusts or smudges on the effect
assembly, focus module and objective lens.
Follow the instructions stated in this user manual
to clean the effect assembly, focus module and
objective lens.
Damaged or deformed effect assembly,
focus module or objective lens.
Replace the damaged or deformed components
Wrong color
Normal end of lamp life
Test the lamp in an adjacent fixture which is
known to be operating properly and then replace
as necessary
Excessive dusts or smudges on the rotating
gobo wheel or color wheel.
Follow the instructions stated in this user manual
to clean the rotating gobo wheel or color wheel.
Rotating gobo wheel, color wheel with
coating wearing off, damages or deformation
Replace the worn-off, damaged or deformed
rotating gobo wheel and color wheel
