4
2.3 Accessories
Item
Qty
Unit
Remark
User Manual
1
Pc
--
Clamps
1
Set
117*80*24
￠
50*10KG
Safety cable
1
Pc
φ
3*80cm&
φ
1*15cm with hook Material
：
Steel
3-pins signal line
1
Set
1.5m*2.5mm² connect blue plug
3. Packing and shipping
3.1 Unpacking
Notes
All products are quality controlled before they dispatched to customers. If the fixture is damaged during delivery,
the customer must notify the shipper and manufacturer to file a damage insurance claim. Photographic evidence
of the damage must be provided.
Cardboard box(specification：840*485*185 mm)：Open the box and take out the whole set of packaging foam
which are contained both the fixture and its accessories. Remove the foam from the top, put away the
accessories, and then take out the fixture wrapped in the plastic bag.
3.2 Packing after use
1.
Switch off the fixture and wait for at least 5 minutes before disconnecting it from AC power. Cool down the
fixture for at least 15 minutes before packing.
2.
Flight case: Wrap the fixture in plastic bags. Gripping the handle and then place it in the flight case along with
all the accessories carefully. Close the cover lid. The
wrap page
are not allowed over 3 layers. Do not upside
down.
3.
Cardboard box: Wrap the fixture in plastic bags. Put it in the packaging foam along with all the accessories.
Place the other set of packaging foam on top then put it carefully in the cardboard box.
4. Installation
4.1 Clamps installation
The fixture can be placed on the stage or mounted on the truss which faces any direction. Attach the clamps to
the mounting position on the base of the fixture.
Warning：Use two clamps when mounting the fixture. Turn the screws attached to each clamp a 1/4 turn clockwise
to lock. Always remember to use the safety cable which goes through the mounting hole on the base. Do not attach
the safety cable on the handle.
