GTD FOS Hydor Profile, Руководство пользователя

Страница: 8 / 34

5
3.1 Protection lock
3. Packing and shipping
Pan and tilt locks are equipped to ensure safe transportation.
PAN: 4 lock positions are located evenly on the Pan.
TILT: 5 lock positions are located on left and right side of the Tilt with the third one in the center.
3.2 Unpacking
Notes
All products are quality controlled and checked for any faults before they are dispatched to customers. If the fixture
is damaged during delivery, the customer must notify the shipper and manufacturer to file a damage insurance claim.
Photographic evidence of the damage must be provided.
Flight-Case
：
Open the cover of the flight-case and remove the plastic packing bags. Hold the handles of the fixture
firmly and take it out carefully.
Cardboard box
：
Open the box and take out the whole set of packaging foam which contains both the fixture and
its accessories. Remove the foam from the top, put away the accessories, and then take out the fixture wrapped in
the plastic bag.
Notes
Check if the pan and tilt are unlocked before connecting the fixture to power.
3.3 Packing after use
1. Switch off the fixture and wait for at least 5 minutes before disconnecting it from AC power. Cool down the
fixture for at least 15 minutes before packing.
2. Lock pan and tilt.
3. Flight case: Wrap the fixture in plastic bags. Hold it by the handles, and then carefully place it inside the flight
case along with all the accessories. Close the cover. Only 3 layers are allowed when piling up the flight cases.
Do not upside down.
4. Cardboard box: Wrap the fixture in plastic bags. Put it in the packaging foam along with all the accessories.