GTD FOS Hydor Profile, Руководство пользователя

Страница: 33 / 34

FOS
30
Problem Possible Cause Suggested Correction
Problem Possible Cause Suggested Correction
Decreased brightness,
uneven pattern
projections
Normal end of lamp life.
Test the lamp in an adjacent fixture which is known to be
operating properly and then replace as necessary.
The midline of the lamp is not aligned with
the center point of the effect assembly
(consisting of the rotating gobo wheel, static
gobo wheel, color wheel, strobe, prism, and
frost), focus module, and object lens.
Reinstall the lamp. Adjust the lamp position until the
midline of the lamp is aligned with the center point of the
effect assemblies (consisting of the rotating gobo wheel,
static gobo wheel, color wheel, strobe, prism, frost, the
focus adjusting module, and the object lens).
Excessive dusts or smudges on the effect
assembly, focus module and objective lens.
Follow the instructions stated in this user manual to clean
the effect assembly, focus module and objective lens.
Damaged or deformed effect assembly,
focus module or objective lens.
Replace the damaged or deformed components.
Wrong color
Normal end of lamp life.
Test the lamp in an adjacent fixture which is known to be
operating properly and then replace as necessary.
Excessive dusts or smudges on the rotating
gobo wheel or color wheel.
Follow the instructions stated in this user manual to clean
the rotating gobo wheel or color wheel.
Rotating gobo wheel, color wheel with
coating wearing off, damages or
deformation.
Replace the worn-off, damaged or deformed rotating
gobo wheel and color wheel.
Non-clear shape
Excessive dusts or smudges on the rotating
gobo wheel or color wheel.
Follow the instructions stated in this user manual to clean
the rotating gobo wheel or color wheel.
Excessive dusts or smudges on the focus
module or objective lens.
Follow the instructions stated in this user manual to clean
the focus module or objective lens.
Damaged or deformed focus module or
objective lens.
Replace the damaged or deformed focus module or
objective lens.
13. Spare parts list
Item P/N Qty Notes
F10 II PROFILE Display(SDI8003C) 5809210107A
1
FOS TECHNOLOGIES-F10 II PROFILE-
101A10 SDI8003C
Scan board(SCR8005B-1) 5809210166A
1
FOS TECHNOLOGIES-F10 II PROFILE-
201A10 SCR8005B
Focusing amplification motor drive
board (SCR8014A-1)
5809210157A
1
FOS TECHNOLOGIES-F10 II PROFILE-
301A10 SCR8014A
Pattern motor drive board
(SCR8015B-1)
5809210159A
1
FOS TECHNOLOGIES-F10 II PROFILE-
401A10 SCR8015B
Cutting motor drive board
(SCR8012B-1)
5809210158A
1
FOS TECHNOLOGIES-F10 II PROFILE-
501A10 SCR8012B
CMY motor drive board
（
SCR8010A-
1
）
5809210160A
1
FOS TECHNOLOGIES-F10 II PROFILE-
601A10 SCR8010A
LED drive board
（
LCR8003B-1
）
5809210161A
1
FOS TECHNOLOGIES-F10 II PROFILE-
701A10 LCR8003B
Power Supply 1412050085
1
EDS1200-4828P 48V 18A/28V 12A