GTD-440P II BSW User Manual
4
General guidelines
Never open this fixture while in use.
The fixture should be kept clean.
DO NOT
operate the fixture in extreme heat or dusty environments. Avoid contact
with chemical liquid.
IP rating: IP45. It should be kept away from the high ambient or dusty environments. Don’t let the fixture contact
with chemical liquids.
Minimum
distance to lighted objects must be
49.21feet (15m)
.
Maximum
temp of the external surface
176˚F (80˚C)
.
Maximum
ambient temperature
113˚F (45˚C)
.
Minimum
distance of inflammable materials from the surface
1.6 feet (0.5m)
.
Lamp should be changed if damaged or distorted in shape due to extreme heat.
The light source of the fixture should be changed by the manufacture or its service agent or certified technicians.
WARNING! Risk of electric shock.
The basic insulation should be kept between the controllable device and the power supply.
Cover, prism or LCD Menu Function Display with visible damages such as cracks or scratches must be replaced to
ensure performance of the fixture.
Disconnect the fixture from power before changing any parts or accessories.
Make sure that the installation area can hold a minimum point load of 10 times the weight of all installed fixtures,
clamps, cables, auxiliary equipment, etc. Check that the cover, clamps and locks are undamaged. Certified safety
cables must always be used when installing the fixture.
The fixture is only intended for installation, operation and maintenance by qualified professional. Instructions stated
in the manual must be complied.
The fixture must be kept in a well-ventilated place at least 50 cm away from any wall surface. Check if the fans or
ventilation openings are unblocked.
This fixture uses discharge lamp. To avoid reducing the lamp’s life, wait at least 15 minutes after powering off to
allow the unit to cool down before handling.
Broken or damaged cables can only be fixed or changed by certified technicians, certified local distributors or the
manufacturer to ensure operational safety.
Do not stick filters or other materials onto the lens. Do not modify the fixture or install other than GTD manufactured
parts.
For questions regarding safety operation, please contact our technical personnel or call the service h8620
61808296.
