GST-RP16 Conventional Repeater Panel
Installation and Operation Manual
Page 1
I General
GST-RP16 Conventional Repeater Panel (hereinafter called GST-RP16), the
supporting product of a conventional fire alarm control panel FACP , is a type of fire
display unit used in buildings or fire control center. When the conventional FACP
receives fire signal, it will alarm and send the signal to GST-RP16. Then the GST-RP16
will indicate the alarm zone and sound to notice the people there to act accordingly.
GST-RP16 is a non-addressable repeater panel matching with GST102A, GST104A,
GST108A, and GST116A Conventional Fire Alarm Control Panel.
II Features
1. It can indicate fire signals in 16 zones separately.
2. With two fault outputs, it can show fault signals from conventional FACP.
3. It is wall-mounted, with advantages of small dimension, simple installation and
operation, good performance, high reliability, and flexible configuration etc.
III Technical Specifications
1. Display Capacity: Maximum 16
signals, 2 fault signals.
2. Wiring: Connect with conventional FACP by multi-wire (16 for fire signals and 2 for
fault signals) and two 24VDC power wires in addition.
3. Operation Environment:
Temperature: 0
+40
Relative Humidity 95%, no condensation
4. Power supply with 18VDC 28VDC,
standby current 12mA, alarm current 60mA.
5. Dimension: 280mm 110mm 46mm.
IV Structure and Operation Principle
1. GST-RP16 is wall-mounted. Its appearance is shown in Fig. 1.
Fig. 1
ZONE12
MUTE
ZONE14
ZONE16
ZONE 2
ZONE 4
ZONE 6
ZONE 8
ZONE10
PowerON
ZONE11
ZONE 1
ZONE 3
ZONE 5
ZONE 7
ZONE 9
FAULT
FIRE
ZONE13
ZONE15
