GST GST-NRP00, Инструкция по установке и эксплуатации, Страница: 15 / 32

GST-NRP00/GST-NRP00-HU/GST-NRP00-PT
Network Repeater Panel Installation and Operation Manual
001 0f 004 FAULT10:18 // There are four devices reporting fault, and this is the
first.
Zone:003-011Optical // The number of the zone with the fault message, the
address and type of the device with the fault message.
5.3.2 Disposal of Fault Message
There are two kinds of fault message. One is system fault, like AC fault, battery fault,
and loop fault. The other is field device fault, like fault with detectors and modules etc.
If the Networked FACPs are powered by battery for longer time than its capacity,
the repeater panel will shut down to protect the battery. Please charge the battery
in time to avoid any possible damage to it.
If it is system fault, please check and repair in time. If the repeater panel needs to
be shut down, please make detailed notes.
If it is field device fault, please repair it in time. You can disable it if the fault can’t be
cleared for some reason, and enable it when the fault is removed.
5.4 Rules for Message Display
If there are multiple messages in the system, they will be displayed in the following order:
fire alarm, action, fault, start, disable.
1 The earliest fire alarm is displayed in priority. The latest action, fault, disabled
message is displayed in priority.
2 There are zone and loop display modes for fire alarm, fault, and disabled messages.
And start and action only has loop display mode.
3 In any display mode, the system will return to displaying of the highest priority if
there is no operation within 20s (15s 30s).
5.5 Rules for Sound Indication
The repeater panel will sound to indicate fire alarm or fault messages.
The repeater panel gives fire engine sound when fire alarm occurs.
The repeater panel gives ambulance sound when fault occurs
The repeater panel will give sound of higher priority if two types of event occur
simultaneously.
Page 12