C-9105R
Conventional Reflective Beam Detector
Installation and Operation Manual
The Intelligent Solution
13
expansion bolts in.
c. Fix the mounting bracket on the wall with four
∅
6
plastic expansion bolts and flat washers.
d. Remove the detector’s top cover; thread the wires
through the wire-in hole and the knock-off hole,
ensuring the length of wires inside convenient for
connection.
e. Fix the detector base onto the bracket with two M4
×
10
bolts and flat washers.
Mounting method is shown in Fig. 10.
Bracket
Plastic Expansion Bolt
Conduit
Fig. 10
(3) Mounting the reflector
The reflector is mounted opposite the detector but in line with it.
When the distance between the detector and the reflector is
)
Holes for Fixing
Detector
Bracket
E-MAIL: [email protected]
