Quick Start Guide
UtilityScan
350HS
Copyright © 2016 Geophysical Survey Systems, Inc.
37
All Rights Reserved
8
Place the cover of the capsule, starting in the back as shown. Make certain there is service loop with the cables so
that there is no tension with the cables as the capsule moves up and down during data collection. Latch the cover
to the lock position.
9
Depending on site conditions and to increase the life of the capsule, you
should adjust the height of the capsule by using a strap. Place a ¼ inch
piece of plywood under the capsule. Loosen the straps so that the
capsule sits on the plywood, then re-tighten the straps.
10
Insert the ToughBook batteries (2), one on each side of the ToughBook.
Содержание UtilityScan 350HS
