Quick Start Guide
UtilityScan
350HS
Copyright © 2016 Geophysical Survey Systems, Inc.
2
All Rights Reserved
•
Cancel.
The icons will display as red
or white,
depending upon whether or not it was the most recent selected option.
Powering and Booting Up
1
Assemble the cart as shown in Appendix A: Cart Assembly Instructions.
Important:
Antenna battery must be attached to the antenna before continuing to Step 2.
2
To power up the system:
a)
Press and hold the power button on the ToughBook for about 2 seconds until a green light illuminates above the
power button. A green light will blink on the antenna during the system boot up. It will be off when the boot up
process is complete. This green light will illuminate when communication is re-established.
b)
After a few seconds, when the system boot up is complete, the UtilityScan 350HS Start Screen is displayed.
c)
Tap either:
•
A1
Icon or press the A1 button to start.
•
A5
Icon or press the A5 button to update system software.
3
Select (by tapping) one of three Modes:
Содержание UtilityScan 350HS
