GSSI 200 HS, Руководство пользователя

Страница: 8 / 36

Geophysical Survey Systems, Inc. GS Series
200 HS Antenna
MN27-151 Rev A 2
Hardware Assembly
This section describes how to assemble your GS Series Antenna to prepare for a survey. Here we are
assuming a distance-based survey; if you are instead performing a time or point-based survey disregard
steps 3-5.
Unpack and prepare:
•
200 HS
•
Tow Handle
•
HS Module
•
1 Lithium-ion battery
•
Model 620 SW (for distance-based only)
•
A wrench (for distance-based only)
1
Attach the HS Module to the top of your 200 HS
antenna. Snap the two levers (one on each side) to
secure it.
2
Clip the Tow Handle to the front of the device. The front
is also where the battery port sits. There are four areas to
clip to – pick an orientation that works best for your site
to keep the antenna on the ground.
3
Attach the Model 620 SW brackets to the back of the 200 HS. You will need a wrench to secure the
bolts properly.