GSSI 200 HS, Руководство пользователя

Страница: 24 / 36

Geophysical Survey Systems, Inc. GS Series
200 HS Antenna
MN27-151 Rev A 18
Collecting Data
This section will describe how to begin collecting data and what you can change while collecting. It will
also describe how to save a file and collect a new one.
1
To start data collection, press the red circle icon on the bottom center of the screen.
2
Data will begin to scroll right away if in Time Mode. If in Distance Mode, data will appear when the
survey wheel starts to spin.
3
While collecting data, the red circle icon will become a red Stop icon. Pressing this button will stop
the file and ether save it automatically (Save Prompt = OFF) or ask you to save or delete (Save
Prompt = ON).
Save is the left icon and Delete is the right icon.
4
The icon next to Stop is the Pause/Resume button. Pressing this will allow you to pause data
collection and move the antenna to a location where you intend to resume data collection. When you
are in position, press the Resume button (right facing arrow next to
red Stop icon) to continue.
5
The control bar at the bottom has all the same functionality as it does during setup. For more
information, please refer to the Overview of Menu Items (above).
6
Pressing the right File Stack icon will allow you to adjust the vertical scale and dielectric constant.
Please note that changing the Depth here will not impact penetration depth, only the Dielectric
constant. To collect deeper data you will need to stop data collection and adjust depth/time range in
the Setup screen.
7
You also have full access to filters and gain adjustments during data collection. Please refer to the
Setting Up for Data Collection section (above) for more details.