GSS PTIM 1000, Инструкция по сборке

Страница: 35 / 42

- 35 - PTIM 1000
n
et work
i
nfor m ation
t
able
(nit)
Bx 4A
off NIT
=> Make
• To switch NIT on/off (" on "/" off ") press the buttons.
• Press the button to activate NIT " Make ".
For all cassettes able to output a NIT:
—> All these cassettes must be set and ready for reception.
—> The NIT of all cassettes are switched on.
—> The cassette fetches all the information (output frequencies, output
symbol rates, etc.) it needs from all cassettes in order to generate
the cable NIT. This process may take a few seconds.
Then the NIT is generated, added and sent to all cassettes. The
other cassettes also add this new cable NIT. The status of all cas-
settes in the NIT menu changes to "
on ".
The display shows: " read … / copy … ".
• To switch off the new NIT (" off ") press the button.
—> The NITs of the other cassettes will stay switched on. When the
NIT of the cassette is switched on again ("
on ") by pressing the
button, the previously generated NIT is added again. If you have
changed parameters in the meantime, you must first select "
Make "
to generate a new, up-to-date NIT.
• Press the button.
—> The "Deleting a PID" – " DROP " menu is activated.
d
eleting a
Pid
In this menu a PID of the transport stream can be deleted.
Bx 4A
PID 0x0000 DROP
off