- 27 -
PTIM 1000
Selecting the transmission protocol
• Press the button to position the cursor under "
UDP
" or "
RTP
".
• Using the
buttons to select the desired transmission protocol:
—> "
UDP
" – The User Datagram Protocol is for the connectionless trans-
mission of data to a certain application. The port number of the
service is also sent which the data should obtain.
—> "
RTP
" – The Real-time Transport Protocol is for continuously trans-
mitting multimedia data streams in an IP network. Unlike UDP, the
header is transmitted which makes the data transmission more ro-
bust.
Setting the port number
• Press the
button to position the cursor under the port number e.g.
"
1234
".
• Use the
buttons to position the cursor under the digit of the port
number displayed to be set.
• Using the
buttons set the desired port number ("
0
" … "
65535
").
• Press the
button.
—> The "Quantity of data packets, Forward error correction, Transmis-
sion channel" – "
PKTS / FEC
" menu is activated.
q
uantit y
of
data
PaCkets
f
orward
error
CorreCtion
t
r ansmission
Channel
In this menu you set the quantity of the data packets to be transmitted, the for-
ward error correction FEC and the transmission channel. If the forward error
correction is used the data to be transmitted is encoded in a redundant way
so that the addressee can correct transmission errors.
Bx 4A
7
off
PKTS / FEC
Defining the quantity of data packets
• Using the
buttons define the quantity of MPEG data packets in one IP
data packet ("
1
" … "
7
").
Содержание PTIM 1000
Страница 1: ...Assembly Instruction PTIM 1000 ...
