- 23 -
PSPT 1000
a
djusting
the
outPut
levels
of
the
Channel
striPs
This menu item is used to set the output levels of the modulators of the channel
strips "
A
" and "
B
" to the same value.
Bx 4A
/B
-3 dB
LEVEL
• Measure and note down the output level of the channel strip.
• By repeatedly pressing the
button scroll back to the "Selecting the
channel strip" menu.
• Select the other channel strip (page 17) and set the following menu items:
• "Selecting channel / frequency setting", page 21.
• "Setting the output channel" or "Setting the output frequency", page 22.
• Switch on the modulator if necessary, page 22.
• Measure and note down the output level.
• Activate the "
LEVEL
" menu of the channel strip with the higher output level.
• By pressing
adjust the higher output level of the one channel strip
to the lower output level of the other channel strip incrementally ("
0
" …
"
–10 dB
").
• Press the
button.
—> The "Setting the output signal" – "
COFDM-MODE
" menu is activated.
Please take note of the tables below before setting the COFDM pa-
rameters.
Содержание PSPT 1000
Страница 1: ...Assembly Instruction PSPT 1000 ...
