- 18 -
PSPT 1000
setting the port number" – "
MODE / PORT
" menu is activated.
—> With the
button the input IP settings are skipped. The
"Setting the output frequency" – "
OUTPUT
" menu is activated.
s
witChing
the
iP
inPut
off
or
on
s
eleCting
the
tr ansmission
ProtoCol
s
et ting
the
Port
number
In this menu you can switch off or on the IP input of the transport stream fed via
the LAN interface and define the transmission protocol and the port number.
Bx 4A
/B
on UDP
MODE/PORT
1234
Switching the IP input off or on
• Press the
buttons to switch "
off
" or "
on
" the IP address of the trans-
port stream fed via the LAN interface, if necessary.
Selecting the transmission protocol
• Press the button to position the cursor under "
UDP
" or "
RTP
".
• Using the
buttons to select the transmission protocol wished:
"
UDP
" – The User Datagram Protocol is for the connectionless transmission of
data to a certain application. The port number of the service is also
sent which the data should obtain.
"
RTP
" – The Real-time Transport Protocol is for continuously transmitting mul-
timedia data streams in an IP network. Unlike UDP, the header is
transmitted which makes the data transmission more robust.
Setting the port number
• Press the
button to position the cursor under the port number e.g.
"
1234
".
• Use the
buttons to position the cursor under the digit of the port
number displayed to be set.
• Using the
buttons set the port number wished.
Содержание PSPT 1000
Страница 1: ...Assembly Instruction PSPT 1000 ...
