GSS PSPT 1000, Инструкция по сборке

Страница: 17 / 33

- 17 - PSPT 1000
s
et ting the
udP
Port
The UDP port setting is required if, e.g. in combination with cassette
PHIS 1000 S, the text file with the channel tables can not be uploaded via
port 60000 (default). The port set must match to the port for uploading the text
file (see assembling instruction of cassette PHIS 1000 S)
Bx 4
60000 UDP-PORT
• Use the buttons to place the cursor under the digit of the port number
displayed to be set and use to set the port number wished (" 0 " …
" 65535 ").
• Press the button.
—> The "Selecting the channel strip" – " LINE " menu is activated.
s
eleCting the Channel striP
Bx 4
Line A <= LINE
=> Line B
• By pressing select channel strip " A " (" Line A ") or select channel strip " B "
(" Line B ") by pressing the button.
—> The "Setting the IP input" – " INPUT " menu is activated.
s
et ting the
iP
inPut
In this menu you select the IP input, to which the setting shall be done in the
submenus.
Bx 4A /B
IP-1
INPUT
– – =>
• With the buttons select one IP input (1-4).
• Press the button.
The "Switching the IP input off or on, selecting the transmission protocol,