GSS PAMS 4000, Инструкция по сборке

Страница: 16 / 21

- 16 - PAMS 4000
• Press the button.
—> The "Station filter" – " INPUT ASI " menu is activated.
s
tation filter
The default setting for the station filter is " ALL ". In this menu you define the
stations received to be transmitted. If stations are activated the output symbol
rate increases.
If the station filter is switched off (factory default) all stations of the transport
stream passes the station filter. As soon as the station filter is activated all sta-
tions are inactive and can be added to the transport stream selectively.
INPUT
OK
ASI
ALL =>
• Use to switch on/off the filter (FILTER/ALL).
• Use to call up the channel selection.
s
tation seleCtion
In this menu you select the stations (services) you would like to transmit.
01/10 Box 4 TV +
Das Erste
—> All stations from the channel strip will be read, and then displayed
with name and station type.
—> If no station is found, the following error message will appear in the
display: " FILTER no Service ".
In this case, check the ASI input signal.