GSS HDMT 1000 ASI LAN, Руководство по сборке

Страница: 31 / 43

- 31 - HDMT 1000 ASI LAN / HDMT 1001 C
Inverting the user signal
Ê œÀÊiÝVi«Ìˆœ˜>ÊV>ÃiÃÊ>˜`ʺœ`iÀ»Ê`ˆ}ˆÌ>ÊV>LiÊÀiViˆÛiÀÃ]ÊÌ iÊëiVÌÀ>Ê«œÃˆÌˆœ˜Ê
of the user signal can be inverted “ inverse ”. The factory default is “ normal ”.
Ê UÊ 1ÃiÊ to place the cursor under “ normal ”.
Ê UÊ 1ÃiÊ to set the spectral position to “ inverse ”.
Ê UÊ *ÀiÃÃÊÌ iÊ button.
—> The “Setting stuffing” – “ STUFFING ” menu is activated.
Setting stuffing
Bx 4A
SR=6900 (6325) STUFFING
Zahl 1 Zahl 2
Number 1 Number 2
SR=6900 (= “Number 1”): Active output symbol rate
( 6325 ) (= “Number 2”): The current measured output symbol rate.
Ê vÊÌ iÊÃÌ>̈œ˜ÊvˆÌiÀʈÃÊ>V̈Û>Ìi`]ÊÌ ˆÃÊÛ>ÕiʈÃʏœÜiÀÊÌ >˜ÊÌ iÊÛ>ÕiʜvÊÌ iʺ ՓLiÀÊ
£»°Ê/ iÊÛ>ÕiÊvÕVÌÕ>ÌiÃ]ÊȘViÊÌ iÊ`>Ì>ÊÀ>ÌiÃʜvʈ˜`ˆÛˆ`Õ>ÊÃÌ>̈œ˜ÃÊ>ÀiÊ`ޘ>“ˆ -
cally modified by the broadcasters.
—> “Number 2” is not displayed in the channel strips “ A ” or “ B ” at the set-
tings “ OUTROUTE 1=>ASI ASI=>MA ” or “ 2=>ASI ASI=>MB »]ÊvœÀÊ
the symbol rate of the ASI input signal cannot be measured. The ASI
input signal therefore must be built in such a way so that the output
symbol rate (“Number 1”) is not exceeded.
The symbol rates of the transport streams built by the cassette can be
measured at the setting “ OUTROUTE ASI=>ASI ” and be displayed in the
respective channel strip.
Ê UÊ Use the buttons to place the cursor under the number to be changed
(“Number 1”) and set the symbol rate with the buttons . The value set
corresponds to the new output symbol rate.
Increasing the value of “Number 1”.
—> The “Number 1” can be increased to any value up to 7500.