GSS HDMT 1000 ASI LAN, Руководство по сборке

Страница: 13 / 43

- 13 - HDMT 1000 ASI LAN / HDMT 1001 C
3.4 Connecting the cassette
Ê UÊ œ˜˜iVÌÊÌ iÊÊVœ˜˜iV̈œ˜ÃÊ̜ÊÌ iʈ˜«ÕÌà 3 (channel strip “ A ”) and 1
(channel strip “ B ”) .
Ê UÊ œ˜˜iVÌÊÌ iÊ-ʈ˜«ÕÌÊ 6 and the ASI output 7 to the peripheral ASI devices.
3.5 Retrofitting a CA module
The cassette is equipped with a common interface. It allows you to connect a
CA module for various scrambling systems and service providers. Scrambled
channels can only be descrambled with a CA module suitable for the scram-
bling system and the corresponding smart card. The smart card contains all the
ˆ˜vœÀ“>̈œ˜ÊvœÀÊ>ÕÌ œÀˆÃ>̈œ˜]Ê`iÃVÀ>“Lˆ˜}Ê>˜`ÊÃÕLÃVÀˆ«Ìˆœ˜°
The cassette HDMT 1001 C is able to scramble unscrambled channels via an
adequate CA module.
– Check with the distributor or manufacturer of the CA module to be used
to ensure that it is suitable for descrambling several channels.
– The hardware and software of this cassette have been thoroughly prepared
and tested.
Any changes made by programme provider to the structures in the pro-
gramme data might impair or even prevent this function.
Ê qÊ 7 i˜ÊܜÀŽˆ˜}ÊÜˆÌ ÊÌ iÊʓœ`Տi]Ê«i>ÃiÊÀi>`ÊÌ iÊVœÀÀi뜘`ˆ˜}ʜ«iÀ>Ì -
ing manual from the respective provider.
Ê UÊ ˜ÃiÀÌÊÌ iÊÓ>ÀÌÊV>À`
1
into the CA module
2
so that the chip
3
on the
smart card faces the thicker side (top) of the CA module.
Ê UÊ ˜ÃiÀÌÊÌ iÊʓœ`Տiʈ˜ÌœÊÌ iÊ}Ո`iÊÀ>ˆÃʜvÊÌ iÊÊϜÌ
4
with the top side
of the CA module facing the top side of the cassette.
Ê UÊ *Õà ÊÌ iÊʓœ`ՏiÊÜˆÌ œÕÌÊV>˜Ìˆ˜}ʈ˜ÌœÊÌ iÊ}Ո`iÊÀ>ˆÃʜvÊÌ iÊÊϜÌ
4
and contact it to the common interface.
3
4
1
2