GSS HDM 500 C, Руководство по сборке

Страница: 14 / 22

- 14 - - 14 -
For programming in these channel ranges and in the frequen-
cy ranges below them, we recommend starting with channel
S21 / 306 MHz going back in steps of 8 MHz.
• Use to select channel setting “ Channel ” or frequen-
cy setting “ Freq. ”.
• Press the button.
—> The “Setting the output channel” or “Setting the out-
put frequency” – “
OUTPUT ” menu is activated.
—> If frequency setting is selected continue on page 15 with
“Setting the output frequency”.
Setting the output channel
In this menu you set the output channel (S21 … C69) of the
channel strip. Additionally the modulator of the channel strip
can be switched off or on (page 15).
• Use the buttons to set the output channel.
Bx 4A
Channel
OUTPUT
Channel / Freq.
Bx 4A
S41
OUTPUT
on
on / off
▶ ◀
/