GSS HDM 500 C, Руководство по сборке

Страница: 16 / 22

- 16 - - 16 -
• Measure and note down the output level of the channel
strip.
• Save the settings by pressing the
M
button.
• Select the other channel strip (page 13), measure and note
down its output level.
• Activate the “ LEVEL ” menu of the channel strip with the
higher output level.
• By pressing adjust the higher output level of one
channel strip to the lower output level of the other channel
strip incrementally from “
0 ” to “ –10 dB ”.
• Press the button.
—> The “Setting the LNB oscillator frequency” – “ LNB ”
menu is activated.
Setting the LNB oscillator frequency
Set the oscillator frequency of the LNB used in this menu.
• Use
▶ ◀
/
to position the cursor under the digit to be set
for the frequency display.
• Press to enter the oscillator frequency of the LNB
used.
• Press the button.
—> The “Setting the input symbol rate” – “ SYMBOL ” menu
is activated.
▶ ◀
/
Bx 4A
10600 MHz
LNB