GSS HDE 164, Инструкция по сборке

Страница: 9 / 24

- 9 - HDE 164
3.2 C
onneCting the
e
nCoder module
E
D
F
H
G
• Connect the audio inputs D (right channel) / E (left channel) and video
inputs
F
to corresponding signal sources.
• If required connect the ASI input G and ASI output H to corresponding
ASI devices (e.g. the ASI output to the ASI input of the next HDE 164 if you
would like to cascade several HDE 164 ; page 6).
3.3 emC
regul ations
To comply with the current EMC regulations, it is necessary to connect the lines
leading in and out of the head-end station using cable terminals.
When mounting the module in a head-end station which is installed in a 19"
cabinet, make sure the connections leading in and out for the 19" cabinet are
made using cable terminals.
Tighten the nuts on the cable terminals until the teeth on the lock washer have pen-
etrated the exterior coating and a good connection is made between the housing
and cable terminals.