- 23 -
STC 4-16 IPS CI
158
Indication of output port setting
159
Channel Number: Specifies a station assignment for clients that are pro-
grammed via the M3U or xml list (
162
,
164
).
160
SAP Group (Groups/Genres for
162
)
161
Herein you can perform a quick setup for columns
155
…
160
as well as add
external services.
Quick-Setup:
—> By entering "Idx - from - to" you can select the lines for which you
want to make changes. If you do not enter a value, programming
is carried out from line 1 to line 128, but only for those columns for
which you have entered changes.
—> If you set a check mark at "Output change", the corresponding
outputs are switched on or off depending on selection
/
.
You can delete the contents of the columns "Service", "Prog.-No."
and "SAP group" when selecting "reset" for each column.
In the "Start IP" field, you can enter the output IP address for row 1.
This address is then increased by 1 in each additional row.
In the field "Prog.-No." you can enter the station number for row 1.
This number is then increased by 1 in each additional row.
Entries in the fields "Port" and "SAP Group" are transferred to all
fields in the columns.
•
Click on "accept", check the information and confirm with "OK".
Example:
