GSM SMS Alarm Messenger
Pro X (Premium)
13
8.
Quick Startup
1.
Insert SIM Card into the alarm unit
2.
Connect 12VDC power input
3.
Wait until the
LED2
is on (no flash) about 15~30 seconds
4.
Use another mobile phone, write a SMS message as below:
PWD:
1234
,STATUS%
5.
Send the message to the phone number of SIM card in the alarm unit
6.
Within 30 seconds, your mobile phone will receive a reply SMS message from
the alarm unit about its health status.
7.
The unit is working normal now. Go to the next pages for other operations.
Note:
Caller ID service must be activated
9.
Alarm Trigger Response Time
After power on, the unit will take about 30 seconds for GSM module initialization and
accessing the GSM network.
Upon alarm triggered, the unit will send the SMS alert message to Control Centre, and
then other 4 programmable phone numbers. Control Centre can be disabled in order to
make the users phone number receiving the alarm sooner.
10.
GSM Network Connectivity
1.
When GSM network is inaccessible or disconnected on sending SMS, the SMS will be
lost.
2.
When GSM network is inaccessible or disconnected before sending SMS, the unit will
keep searching for the network and send the SMS until the GSM network resumes.
3.
When sending the SMS alarm message fails, the SMS unit will keep the last 10 SMS
alarm message and resend when the unit succeeds in accessing the GSM network
again.
