Page 4 of 4
Model:
MCM
TROUBLE SHOOTING
• DIM LCD
Check battery voltage, low battery can cause a dim display.
Very low temperatures can cause a slow reacting and dim display.
• THE MCM MENUS DO NOT CORRESPOND TO MANUAL MENUS
The MCM may have a later than 102 software revision, check software revision.
• POWERED MCM BUT ERRATIC OR NO DATA DISPLAYED
The D type connector may not be properly plugged to the MPPT or the ribbon
cable may be damaged.
• MCM IS NOT TURNING ON
Check that the MPPT is powered up, the MPPT led should be on or flashing.
Disconnect and reconnect the D type connector to the MPPT.
Check ribbon cable for signs of damage.
Product Specifications
Display
LCD 2 X16 CHARACTERS
Dimensions
110mm X 77mmX 35mm
Consumption
0.02A
Voltage Accuracy
+/- 1% FS
Current Accuracy
+/- 5% FS
Connector
D TYPE 9 PIN
Cable Length
1.2M
Warranty Conditions:
The product is warranted to be free from defects in materials and workmanship under normal use and
service for a period of 24 months from the date of sale. This warranty covers defective parts and workmanship provided that
the product is shipped prepaid to the seller within 24 months of purchase of goods. This warranty is limited to the repair or
replacement (at the manufacturers’ discretion) of parts and shipping prepaid to the original despatch destination. We regret that
no liability can be accepted for consequential or special damages of any kind howsoever arising in connection with products
supplied by the seller. This warranty is in lieu of all other warranties expressed or implied. No representative is authorised to
assume for the seller any other liability in connection with the seller’s products.
Maximum Power
Point Tracker Monitor
Operating Instructions
Please Read Before Use
Unit 2, 110 Station Road, Seven Hills ,NSW, 2147, Australia
MCM-R5
