manualshive.com logo in svg

GSi TopDry CE 2000 Autoflow, Руководство оператора

Поделиться
Скачать
GSi TopDry CE 2000 Autoflow Скачать руководство пользователя страница 18

7. Control System

18

PNEG-1820CE

 CE Compliant Top Dry Series 2000 Autoflow

Use the Increase and Decrease buttons to select the correct time or date. Press the Enter button to accept.

LOW LEVEL TEST MODE

 - Use the Increase and Decrease buttons to enable or disable Drying Chamber 

Low Level switch monitoring.

WET TANK TEST MODE

 - Use the Increase and Decrease buttons to enabled or disabled wet supply 

level switch monitoring.

START FANS WITH HIGH

 - Use the Increase and Decrease buttons to enable or disable fan starting 

based on the Upper Drying Chamber Level switch. Recommended practice is fans starting with the Drying 
Chamber Low Level switch.

AERATION FAN BYPASS

 - Use the Increase and Decrease buttons to enabled or disabled. When 

enabled the fan runs after the dryer stops.

# OF FILL SYSTEMS

 - Use the Increase and Decrease buttons to select one or two (2) fill systems under 

dryer control. Note setting of fill #1 and fill #2 system timers 

on Page 19

.

SELECT DRYER TYPE

 - Use the increase and decrease select dryer model:

AF3 - Three (3) drying fan Autoflow.

AF2 - Two (2) drying fan Autoflow.

AF1 - Single drying fan Autoflow.

AB3 - Three (3) drying fan Autobatch.

AB2 - Two (2) drying fan Autobatch.

AB1 - Single drying fan Autobatch.

SELECT TEMP SCALE

 - Use the increase and decrease to select Fahrenheit or Celsius.

MODEM INIT STRING

 - Not used. Press the Enter button to return to the main drying screen.

BURNER DIFFENTIAL

 - Use the Increase and Decrease buttons to change temperature difference 

between high-fire and low-fire. Recommended setting 3°C.

Help

Currently not used.

Plenum

Set target plenum temperature.

Grain

Set target grain temperature with Increase/Decrease buttons.

Screens

By pressing the Screens button, you can toggle between two (2) screens. Screen #1 displays the current 
plenum and grain temperatures and their set points in parenthesis. Screen #2 displays the status of the 
Drying Chamber Rotary switches and the total number of batches. In all screens the dry time and dump 
time are displayed at the bottom of the screen.

Содержание TopDry CE 2000 Autoflow







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды