Assembling the 4-Leg Tower Section (Warren Bracing)
The following assembly procedure can be used for any section with warren bracing that may have one,
two or four-bays. A similar procedure can be used for assembling the different sizes of warren braced 4-
leg tower sections.
What You Should Know
You will assemble two completed sides (front and rear) and connect them together to complete the 4-leg
section. Assemble the braces starting from the top working towards the bottom. Square the tower section
and tighten all hardware before stacking.
1. Insert the strut (2) between the shear plates located at the top of the columns (1) and connect them
using bolts (3) and nuts (4).
Figure 5-6
Assembling the top strut
1
Weld Column
3
Bolt
2
Strut
4
Nut
38
PNEG-2115
2-Leg and 4-Leg Towers
