manualshive.com logo in svg

GSi PNEG-1391, Руководство по сборке и эксплуатации

Поделиться
Скачать
GSi PNEG-1391 Скачать руководство пользователя страница 6

6

Safety

PNEG-1391     8",10", & 12" BE-SAW Augers

This manual contains information that is important for you, the owner/operator, to know and

understand. This information relates to protecting 

 personal safety

 and 

preventing

equipment problems

. It is the responsibility of the owner/operator to inform anyone

operating or working in the area of this equipment of these safety guidelines. To help you

recognize this information, we use the symbols that are defined below.

Please read the manual and pay attention to these sections. Failure to read this manual

and it’s safety instructions is a misuse of the equipment and may lead to serious injury or death.

SAFETY GUIDELINES

DANGER

 indicates an imminently hazardous situation which, if

not avoided, will result in death or serious injury.

This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.

WARNING

 indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION

 indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury.

CAUTION 

used without the safety alert symbol indicates a potentially

hazardous situation which, if not avoided, may result in property
damage.

NOTE

 indicates information about the equipment that you

should pay special attention to.

Содержание PNEG-1391

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды