4. Installation
PNEG-2116
Bucket Elevator
29
Figure 4O Posi-Guide Gravity Take-Up
2. If the elevator includes a posi-guide gravity take-up as shown in
, position a jack under the
indicated surface of the take-up side post to lift the take-up, including the pulley.
Ref #
Description
Ref #
Description
Q
Pillow Block Bearing
W
Lift Here to Raise Pulley
S
Boot Assembly
X
Access Door
T
Removable Cover
Y
Connection Bolts
U
Weight Box
Z
Guide Rollers
V
Alignment Adjusting Screws
AA
Roller Bracket
NOTE:
These rollers (Z) are factory
adjusted and should never need field
adjustment.
An improperly supported posi-guide gravity take-up can slip out of position or fall,
causing serious injury or damage. Assure proper placement of jack and supports.
